Electric press

we:

　　•Provide a controller based on integrated drive and control, directly drive the servo motor, connect the pressure sensor and grating ruler, etc. to complete the full closed-loop control of the electric cylinder position and pressure.

　　• The optimized actuator of the press assembly machine ensures the flatness and parallelism of the template, the position accuracy of the axis of the electric cylinder and the axial circle runout, assists the customer to cancel the complicated equipment such as guiding, positioning, and preventing overpressure in the previous tooling, and reduces the tooling Cost and achieve rapid mold change and production adjustment.

Requirements:

　　The motor rotor shaft is press-fitted with the iron core and the cover plate in an interference fit.

Crafting process:

　　Using the position mode, press the rotor shaft of the motor vertically into the rotor core and cover plate, and experience four stages of contact starting force-stable pressing-pressing end-pressing limit, as shown below.

Technical index:

　　The pressing depth is about 40mm, and the cycle time is 5s. It is necessary to ensure that the indentation depth error is controlled within the range of 0.02mm, and can detect and eliminate products with excessive tolerances. Four window detections are enabled, and real-time online quality detection is required.