National consultation hotline
0769-82730118project | parameter |
stroke | 150mm |
Opening height | 280mm |
thrust | 0-300Kgf |
Pressure accuracy | 0.5%FS |
Maximum speed | 250mm/s |
Pressing speed | 0-30mm/s |
Positioning accuracy (any speed, load) | ±0.02mm |
Repeatability | ±0.005mm |
Operating Voltage | 220V 50Hz |
power | 750W |
Total weight of equipment | 90Kg |
Requirement:
• The whole pressure and position protection, the pressure is not allowed to overshoot, and the protection state is immediately entered when the initial section guidance does not meet the requirements.
• Visualization of press-fitting process, curve showing process details.
• The product pressure accuracy is 0.5%FS.
• Product depth consistency is within 0.02mm.
Crafting process:
•Provide supporting tooling design, tooling to meet the requirements of fast loading positioning and accurate guidance of protective cover pressing.
• Full pressure and position protection, once the actual pressure exceeds the protection value, it will immediately enter the protection process.
Small models of equipment and easy to deploy, to meet future needs for increased production capacity.
Product structure:
Crafting process:
Provide supporting tooling design, tooling to meet the requirements of rapid loading positioning, protective cover press-in accurate guidance.
The whole pressure and position protection, once the actual pressure exceeds the protection value, enter the protection treatment immediately.
Small models of equipment and easy to deploy, to meet future needs for increased production capacity.
Tooling:
Schematic diagram of pressing machine